HARNESS LEAD | Non-Pull Escape Resistant Harness Lead (Made in the USA)

Description

TIP: Once you properly fit Harness Lead to dog and you begin the walk, you will notice the rubber disc will rise in air. This is correct. The RUBBER DISC is there to prevent over loosening. Rubber disc acts as a "floater". Allow the RUBBER DISC to RISE and FALL naturally. Do not continue to push rubber disc down as you walk, this will keep leash tight on dog.

ESCAPE RESISTANT: USE AS WALKING TOOL ONLY. DO NOT USE TO TIE DOG OUT DUE TO TIGHTENING ASPECT OF HARNESS. IT IS NOT CHEW PROOF. If dog attempts to back out of this harness, leash will tighten like a slip lead. Must be used according to directions.

ADJUSTS TO ANY SIZE OR BODY TYPE: Align the movable black stops to line up with front leg and it will fit any body perfectly.

SKILLFULLY HANDCRAFTED IN U.S.A.
Made of double braided polyester, tensile strength 3,000 lbs.

Easy to use! Instructions printed on the INSIDE of the packaging.

|Small/Medium
– Best for 14 lbs to 40 lbs
– (2 ft shorter than the M/L)
– 14 to 20 lb dog is 6 ft | 20 to 30 lb dog 5 ft | 30 to 40 lb dog 4 ft. (APPROXIMATE Leash length from back to handle)
– 3/8 diameter thickness

*can scale down as small as 10 lbs, but functions best on 14 lbs and up

*S/M can go up to 100 lb dog but length will be under 4 ft.

Medium/Large
– Best for 40 lbs to 120 lbs (2 ft longer than the S/M)
– 40 to 60 lb lb dog is 6 ft | 60 to 90 dog lb 5 ft | 100 to 120 lb dog 4ft | 130 to 170 dog 3 ft. (APPROXIMATE Leash length from back to handle)
– ​7/16 diameter thickness

*M/L will fit smaller 40lbs, but length will be over 6 ft

Extra Large
– Best for 120 lbs to 200 lbs (2 ft longer than the ML)
– 120 to 150 lbs dog 6 ft | 150 to 200 lbs dog 4 ft. (APPROXIMATE leash length from back to handle)
– 1/2 inch diameter thickness

|- Escape artists
– pups that pull
– pups of all sizes

|Please refer to the how-to video

|Machine wash cold
hang to dry